北京邮电大学学报

  • EI核心期刊

北京邮电大学学报 ›› 2013, Vol. 36 ›› Issue (6): 84-88.doi: 10.13190/j.jbupt.2013.06.018

• 研究报告 • 上一篇    下一篇

优于皮秒分辨率的特高频率测量方法

杜保强1, 左艳迪1, 周渭1,2, 董绍锋2, 王延峰1   

  1. 1. 郑州轻工业学院 电气信息工程学院, 郑州 450002;
    2. 西安电子科技大学 测量与仪器系, 西安 710071
  • 收稿日期:2013-03-05 出版日期:2013-12-31 发布日期:2013-12-31
  • 作者简介:杜保强(1973—),男,副教授,硕士生导师,E-mail:dubaoqiang@yeah.net.
  • 基金资助:

    国家自然科学基金项目(U1304618);中国科学院精密导航定位与定时技术重点实验室开放基金项目(2012PNTT01);河南省科技攻关计划项目(132102210180);河南省教育厅科技攻关项目(14A535002);郑州市科技攻关项目(131PPTGG411-6);郑州轻工业学院博士基金项目(2011BSJJ031);中央高校基本科研专项基金项目(K5051204003)

Extra-High Frequency Measurement for Picoseconds Resolution

DU Bao-qiang1, ZUO Yan-di1, ZHOU Wei1,2, DONG Shao-feng2, WANG Yan-feng1   

  1. 1. School of Electric and Information Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China;
    2. Department of Measurement and Instrument, Xidian University, Xi'an 710071, China
  • Received:2013-03-05 Online:2013-12-31 Published:2013-12-31

摘要:

特高频率的测量是当前国际时频测控领域的研究热点. 针对特高频率测量难、精度不易保证等问题,结合时空转换关系,提出了一种优于皮秒分辨率的特高频率测量方法. 利用异频相位检测原理,把频率的测量转换为精密短时间间隔的测量,在短时间间隔测量中引入时间和空间的转换关系,利用信号传输延迟的稳定性,通过测量空间长度量获得延迟时间相位差,最终实现特高频率的测量. 实验结果证明了该方法的有效性和可行性,在射频范围内其测量分辨率可达到10-12/s量级,与传统的频率测量方法相比,具有结构简单、成本低廉及测量精度高的特点.

关键词: 时空转换, 异频相检, 延迟传输, 频率测量

Abstract:

The extra-high frequency measurement is a hot issue of research in the field of current international time-frequency measurement and control. Aiming at difficult measurement and uncertain precision of extra-high frequency in time and frequency measurement domain and combining time and space conversion relations, an extra-high frequency measurement in picoseconds was proposed. Utilizing different frequency phase detection principle, a precise short time interval measurement was changed into the measurement of frequency. By introducing conversion relations of the time and space and using stability of signal delay in the course of transmission, a phase difference of delay time was obtained based on measuring space length value. Furthermore, an extra-high frequency measurement could be achieved in the proposed method. Experiment shows that the measurement resolution of 10-12 within 1 s can be reached in radio frequency range. Comparing the traditional frequency measurement method, the proposed method features simple structure, low cost and high measurement precision.

Key words: time and space conversion, different frequency phase detection, delay transmission, frequency measurement

中图分类号: