非圆截面车削与进给驱动力学模型的建立

北京邮电大学学报 ›› 1998, Vol. 21 ›› Issue (2): 28-32.

非圆截面车削与进给驱动力学模型的建立

邓中亮

北京邮电大学机械电子工程系, 北京 100876; 32岁, 男, 副教授

收稿日期:1997-04-15 出版日期:1998-03-10
基金资助:
国家自然科学基金资助项目

Modeling on Cutting and Feed Driving Force#br# in Noncircular Sectional Turning

Deng Zhongliang

Department of Mechanical and Electronic Engineering, Beijing University of Posts and Telecommunications, Beijing 100876

Received:1997-04-15 Online:1998-03-10
Supported by:

摘要/Abstract

摘要： 对非圆截面零件车削过程中的车削力、车削工作角度、径向进给运动等进行了探讨,并建立了非圆截面车削力模型, 在此基础上, 对椭圆型工件、四边形工件及八角形工件进行了车削力的分析计算, 建立了进给驱动力学模型.

关键词: 车削, 非圆零件, 进给机构

Abstract: A discussion on turning force, working angle and radial feeding movement during the turning procedure of noncircular sectional elements, a model on the turning force is presented.Based on the analyses and calculation on turning force of elliptical, quadrilateral and octagon elements, a driving force model of feeding mechanism is built.

Key words: turning, noncicular sectional element, feeding mechanism

中图分类号:

TH161

邓中亮. 非圆截面车削与进给驱动力学模型的建立[J]. 北京邮电大学学报, 1998, 21(2): 28-32.

Deng Zhongliang. Modeling on Cutting and Feed Driving Force#br# in Noncircular Sectional Turning[J]. JOURNAL OF BEIJING UNIVERSITY OF POSTS AND TELECOM, 1998, 21(2): 28-32.