线簧连接器的设计方法

北京邮电大学学报 ›› 1998, Vol. 21 ›› Issue (1): 53-57.

线簧连接器的设计方法

项万鹏¹, 骆国平¹,杜立环²

¹北京邮电大学机械电子工程系, 北京 100876; 第一作者58岁, 男,副教授; ²亿万通迅设备厂有限公司, 顺德 528300

收稿日期:1997-03-03 出版日期:1998-01-10

Designing of Wire-Spring Connectors

Xiang Wanpeng¹, Luo Guoping¹,Du Lihuan²

¹Department of Mechanical and Electronic Engineering, Beijing University of Posts and Telecommunications, Beijing 100876;²Yiwan Telecommunication Equipment Factory, Shunde 528300

Received:1997-03-03 Online:1998-01-10

摘要/Abstract

摘要： 在对线簧连接器力学模型数理解析的基础上, 分析工作情况, 给出结构几何参数、材料选择, 推导得出强度条件, 从中可清晰看出某些重要参数的改动对连接器性能的影响.由此提出了线簧连接器的设计方法和步骤, 可作为开发系列产品的理论依据.

关键词: 低频连接器, 电接触性能, 线簧连接器

Abstract: Based on mathematical analysis for wire-spring connector, gives out its constructive geometry parameters fixing, materials selecting, strength condition checking etc. Thus, the effect of some important parameters changing on connector performance can be seen clearly.Accordingly, design method and procedure are supplied for wire-spring connector, which may guide to exploit serialization products.

Key words: low-frequency connectors, electrical contact property, wire-spring connectors

中图分类号:

TM503.5

项万鹏, 骆国平,杜立环. 线簧连接器的设计方法[J]. 北京邮电大学学报, 1998, 21(1): 53-57.

Xiang Wanpeng, Luo Guoping,Du Lihuan. Designing of Wire-Spring Connectors[J]. JOURNAL OF BEIJING UNIVERSITY OF POSTS AND TELECOM, 1998, 21(1): 53-57.