[1] Chan T F, Dubey R V. A weighted least-norm solution based scheme for avoiding joint limits for redundant joint manipulators[J]. IEEE Transations on Robotics and Automation,1995, 11(2): 286-288.
[2] 刘廷荣, 吴瑞珉. 一种含移动副七自由度机器人操作机轨迹规划[J]. 机器人, 1994, 16(5): 296-302. Liu Tingrong, Wu Ruimin. Trajectory planning for a seven DOF robot manipulator with a prismatic joint[J]. Robot, 1994, 16(5): 296-302.
[3] 季婷, 孙汉旭. 关于一种模块化机器人的简化运动学反解[J]. 北京邮电大学学报, 2004, 27(增刊2): 89-93. Ji Ting, Sun Hanxu. A simplified approach to inverse kinematics solution for a modular robot[J]. Journal of Beijing University of Posts and Telecommunications, 2004, 27(Sup 2): 89-93.
[4] Groom K N, Maciejewski A A, Balakrishnan V. Real-time failure-tolerant control of kinematically redundant manipulator[J]. IEEE Transations on Robotics and Automation,1999, 15(6): 1109-1116.
[5] 董春, 樊滨温, 富历新. 机器人多层多道焊圆弧轨迹的一种算法[J]. 哈尔滨工业大学报, 2000, 32(3): 111-114. Dong Chun, Fan Bingwen, Fu Lixin. Planning of circle locus for multi-path/multi-layer welding robot[J]. Journal of Harbin Institute of Technology, 2000, 32(3): 111-114. (上接第4页)
[6] 孙晓斌, 肖人彬, 王雪. 基于曲线几何特征量化提取的轨迹机构检索生成方法[J]. 机械工程学报, 2000, 36(11): 98-105. Sun Xiaobin, Xiao Renbin,Wang Xue. New approach to rapid searching path generating mechanisms[J]. Chinese Journal of Mechanical Engineering, 2000,36(11):98-105.
[7] 王成志, 纪跃波, 孙道恒. 小波分析在平面四杆机构轨迹综合中的应用研究[J]. 机械工程学报, 2004, 40(8): 34-39. Wang Chengzhi, Ji Yuebo, Sun Daoheng. Research on applying wavelet analysis to path synthesis for coupler curves of planar four-bar linkages[J]. Chinese Journal of Mechanical Engineering, 2004, 40(8): 34-39.
[8] 王德伦, 王淑芬, 李涛. 平面四杆机构近似运动综合的自适应方法[J]. 机械工程学报, 2001, 37(12): 21-26. Wang Delun, Wang Shufen, Li Tao. New approach for mechanisms synthesis by adaptive saddle fitting[J]. Chinese Journal of Mechanical Engineering, 2001, 37(12): 21-26.
[9] 彭强, 张同庄, 刘惠林. 平面四杆机构五点轨迹综合的吴方法[J]. 机械设计与制造, 2004(4): 66-67. Peng Qiang, Zhang Tongzhuang, Liu Huilin. Path generation synthesis of planar 4-bar linkage with five precision points using Wu smethod[J]. Machinery Design & Manufacture, 2004(4): 66-67.
[10] Wampler C W, Morgan A P, Sommese A J. Complete solution of the nine-point path synthesis problem for four-bar linkages[J]. ASME Journal of Mechanical Design, 1992, 114(2): 153-159.
[11] Morgan A P, Wampler C W. Solving a planar four-bar design problem using continuation[J]. ASME Journal of Mechanical Design, 1990, 112(10): 544-550.
[12] 杨廷力. 机械系统基本理论[M]. 北京: 机械工业出版社, 1996: 17-60, 115-138. |